More information >>> Close
Case The system for providing safety storage operations by light signaling
Injuries and accidents caused by collision with fork-lifts are usually due to:
Improper work organizing
Increased noise level
distracting the personnel’s
Limited vision in warehouses
Lack of warning signaling
The use of noise-canceling earphones,
or personal audio-players and mobile
Fork-lifts over speed
statistics about 19% of the total number
of accidents in warehouses and
factories are caused by lack of light
Solution - BLUE SPOT SAFETY LIGHT
Risks of service and maintenance
personnel can be minimized by
warning light signaling
Blue spot safety light allows you to:
Blue spot safety light allows a person in the
area of working fork-lifts to notice the
movement of equipment, even located
outside the field of vision, to estimate the
distance, speed, direction of movement, to
leave the dangerous zone or take other
action to ensure security.
High efficiency of Fork-lift safety lights
is connected not only with the direct
impact on the visual channel, but also
with the peculiarities of human
LB-0304BLU - 3 watt Blue LED
LB-0304BLU-PWM - 3 watt Blue LED
Advantages of Blue Spot safety series
characterized by minimal ripple (less than
5%, which corresponds to the regulations in
children, health care);
has a low weight - 640 grams, which
minimizes vibration and provides long-lasting
operation of the equipment and stable
direction of the luminous flux;
has the original design of the bracket with 4
degrees of freedom, which allows a flexible
setting of the light flow;
has a large working distance range (from 0.5
m to 100 m.) at which the required beam
focusing and the necessary light output keep
сomplies to IP66 which allows the use at any
Blue Spot safety particular qualities
Cree LEDs are used in Blue safety light. A specially
designed driver provides:
protection of the chip from overheat - when the
threshold is exceeded the driver is automatically
turned off, thereby protecting from burning out the
electronics and LED;
protection against short electrical pulses - at start or
change of the operating mode of the fork-lift the on-
board network runs a milliseconds long current
pulse of up to 250 volts. Implementation of surge
protection helps to minimize the risk of equipment
failure and provides durability of operation;
minimum ratio of luminous flux pulsations (0,95)
wide range of working temperatures (-20°С to +40°
Call me back
We are happy to call you to answer all questions and to tell you how it works ...
Forklift safety lights and Blue spot light for Forklift
Reducing injuries during storage
operations is a complex problem
to be solved by the use of
additional technical devices.
Forklift safety light is a product
ensuring the safety of warehouse
Forklift safety lights blue is used
to provide safe for-lifts
Blue spot light for Forklift provides
a focused beam of light projected
onto the surface a few meters from
the warehouse equipment in the
direction of movement.
The spotlight with power
consumption only 3 watt and one
LED provides a clear spot at
different distances more than 50
cm. In comparison, other devices
ensure a clear spot only at a
distance of 2-4 meters. The clear
edges of the light spot guarantee
the safety of workers in dangerous
Forklift blue safety lights provide
signaling in conditions where
vibration, aggressive environment
and indicators of shock conditions
are above the accepted norms.
Having no visual contact with a
fork-lift workers are being
warned of the vehicle approach.
Blue led spotlight for Forklift
complies to requirements of
protection class IP66.
Blue Spot spotlight has a wide range of operating
temperatures, voltages, humidity
and reliable protection, so it can be
used in various environments.
Relevance of lighting
at fork-lifts operating
Work in warehouses is often accompanied by injuries or other damage
to health of employees. Part of injuries is caused by careless use of
lifting and transport mechanisms that are present in any warehouse.
Particular attention should be paid to the area of operation of fork-lifts:
except the danger of uncontrolled movement of the loads there is the
danger of a collision with a person or another fork-lift.
Main cause of accidents:
Improper work organizing.
Lack of warning signaling.
Increased noise level distracting the personnel’s
The use of noise-canceling earphones or personal
audio-players and mobile phones.
Fork-lifts over speed.
RISKS OF LIFTING MECHANISMS
unexpected movement, collision or falling cargo;
limited visibility zone of warehouses;
forklifts encounter with people and vehicles;
loss of stability of the truck;
sharp braking or starting off.
Do you have any questions? Do you want to know more details?